DESCRIPTION
GENERAL APPLICATIONS
The gate valve is suitable for working with clean liquids or liquids with a concentration of solids:
Designed for a wide range of applications such as:
Series T valves are available with handwheel rising and non-rising stem, pneumatic, hydraulic, handwheel gear box, and electric drives.
Typically temperatures up to 565° C (1,050° F) pose no issue. If you have a higher temperature application, call or email us so we can learn more about your application.
ANSI Flanges | DIN Flanges | Pressure (PSI) | Actuator Types | Knife Gate Material | Valve Body Material |
---|---|---|---|---|---|
2 inch ANSI | 50 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
2.5 inch ANSI | 65 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
3 inch ANSI | 80 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
4 inch ANSI | 100 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
5 inch ANSI | 125 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
6 inch ANSI | 150 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
8 inch ANSI | 200 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
10 inch ANSI | 250 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
12 inch ANSI | 300 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
14 inch ANSI | 350 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
16 inch ANSI | 400 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
18 inch ANSI | 450 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
20 inch ANSI | 500 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
24 inch ANSI | 600 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
28 inch ANSI | 700 mm | 150 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
32 inch ANSI | 800 mm | 90 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
36 inch ANSI | 900 mm | 90 | HAND, PNEU, ELEC, HYD | SS | MS, Cast SS |
40 inch ANSI | 1000 mm | 90 | HAND, ELEC, HYD | SS | MS, Cast SS |
1200 mm | 90 | HAND, ELEC, HYD | SS | MS, Cast SS | |
Material | Max (°F) | Applications |
---|---|---|
Steel/Steel | >482 | High Temp/ Low water tight |
EPDM | 194 | Non-mineral acids and oils |
Nitrile | 194 | Hydrocarbons, oils and greases |
Viton | 392 | Hydrocarbons and solvents |
Silicone | 392 | Food Products |
PTFE | 482 | Corrosion Resistant |
Note: Other materials available upon request.
Material | Psi | Max (°F) | pH |
---|---|---|---|
Greased Cotton | 150 | 212 | 6-8 |
Dry Cotton | 7.5 | 212 | 6-8 |
Cotton+PTFE | 435 | 248 | 6-8 |
Synthetic+PTFE | 1450 | -328+518 | 0-14 |
Graphite | 580 | 1202 | 0-14 |
Ceramic Fiber | 4.5 | 2550 | 0-14 |